ECN publicatie: facebook
Titel:
Neutron metrology in the HFR: Irradiation of Low Activation Steel specimens (ILAS) : evaluation report
 
Auteur(s):
 
Gepubliceerd door: Publicatie datum:
ECN NUC 1998
 
ECN publicatienummer: Publicatie type:
ECN-I--98-028 Overig
 
Aantal pagina's: Volledige tekst:
46  Niet beschikbaar.

Samenvatting:
ECN is working on the assessment of low temperature irradiation hardeningand embrittlement of ferritic/martensitic alloys, developed for fusion application. The irradiation of specimen holder R285-04 (ILAS) in the HFR in Petten, Netherlands, loaded with tensile specimens manufactured from four types of stainless steel alloys, is part of this programme. The R285-04 assembly was irradiated in channel 3 of a TRIO type facility in HFR core-position D2 up to a target dose level of approximately 2.5 dpa (displacements per atom) in stainless steel at a nominal temperature of about 325C. This report presents the final metrology results obtained from activation monitor sets situated in one of the specimen channels inside the specimen holder, including detailed information concerning an estimation of the fluence dose received by each specimen separately and its temperature during irradiation. The total number of displacements per atom (dpa), the generated helium content and the activity values after irradiation for several waiting times are also given for each specimen. Additionally the metrology results were cross-checked with calculations by means of the KENO-Va Monte Carlo code, giving a very good agreement on the centre-line of the specimen holder, and larger deviations on the top and bottom positions of the assembly. The main results of the thermal and fast neutron fluence measurements, indicate that the obtained damage levels in the steel specimens loaded in this specimen holder vary from 2.1 to 3.5 dpa. Detailed data are presented. 28 refs.


Terug naar overzicht.