ECN publicatie:
Titel:
High efficiency n-type metal wrap through Si solar cells for low-cost industrial production
 
Auteur(s):
Guillevin, N.; Geerligs, L.J.; Naber, R.C.G.; Eerenstein, W.; Weeber, A.W.
 
Gepubliceerd door: Publicatie datum:
ECN Zonne-energie 6-9-2010
 
ECN publicatienummer: Publicatie type:
ECN-M--10-010 Conferentiebijdrage
 
Aantal pagina's: Volledige tekst:
3 Download PDF  (202kB)

Gepresenteerd op: 25th European Photovoltaic Solar Energy Conference and Exhibition - 5th World Conference on Photovoltaic Energy Conversion, Valencia, Spain, 6-10 september 2010.

Samenvatting:
A high-efficiency industrial cell process for n-type wafers using the conventional H-pattern front contact grid has recently become available. Based on simple industrial process steps, production of low-cost n-type cells has become a real possibility. In order to further reduce processing costs and increase module efficiencies, we have combined the strength of the n-type doped crystalline silicon with ECN's metallisation-wrap-through (MWT) solar cell concept, on n-type silicon wafers. As in p-type MWT (PUM) cells, the processing modifications from H-pattern to MWT are very limited. These cells were manufactured using a process similar to the industrial processes used for n-type H-pattern cells, extended with via-hole drilling. We have measured unconfirmed peak efficiencies of 18.7% on 156mm semi-square CZ n-type wafers (238 cm²). We have observed part of the expected current increase compared to the H-pattern grid. The fill factor needs to be further improved to realize the expected significantly higher efficiencies than for front contact cells.


Terug naar overzicht.