Publicaties

Skip Navigation Links.
Recent verschenen
Expand per documenttypeper documenttype
Expand per Unitper Unit
Expand per Clusterper Cluster

Zoeken naar publicaties:
Beperk het zoeken tot de velden:

ECN publicatie:
Titel:
Verkennende evaluatie kwaliteitsbeïnvloeding poederkoolvliegas : bijstoken van biomassa in een poederkoolcentrale of bijmenging van biomassa-assen met poederkoolvliegas
 
Auteur(s):
 
Gepubliceerd door: Publicatie datum:
ECN SF 1-8-2000
 
ECN publicatienummer: Publicatie type:
ECN-C--00-058 ECN rapport
 
Aantal pagina's: Volledige tekst:
88 Download PDF  (7269kB)

Samenvatting:
In this literature survey the consequences of co-firing of biomass andmixing of biomass ash with coal fly ash on the coal fly ash quality is evaluated. Biomass ash considered in this context is produced by gasification, pyrolysis or combustion in a fluidized bed. The irregular shape of biomass ash obtained from gasification, pyrolysis or combustion has a negative influence on the water demand in concrete applications of the coal fly ash resulting from mixing biomass ash and coal fly ash. In case of co-firing, high concentrations of elements capable of lowering the ash melting point (e.g. Ca and Mg) may lead to more ash agglomeration. This leads to a less favourable particle size distribution of the coal fly ash, which has a negative impact on the water demand in cement bound applications. Gasification, pyrolysis and combustion may lead to significant unburnt carbon levels (>10%). The unburnt carbon generally absorbs water and thus has a negative influence on the water demand in cement-bound applications. The contribution of biomass ash to the composition of coal fly ash will not be significantly different, whether the biomass is co-fired or whether the biomass ash is mixed off-line with coal fly ash. The limit values for Cl, SO4 and soluble salts can form a limitation for the use of coal fly ash containing biomass for cement-bound applications. As side effects of biomass co-firing, the level of constituents such as Na, K, Ca and Mg may lead to slagging and fouling of the boiler. In addition, a higher emission of flue gas contaminants As, Hg, F, Cl and Br may be anticipated in case more contaminated biomass streams are applied. This may also lead to a higher contamination level of gypsum produced from flue gas cleaning residues. Relatively clean biomass streams (clean wood, cacao shells, etc.) will hardly lead to critical levels of elements from a leaching point of view. More contaminated streams, such as sewage sludge, used and preserved wood, petcoke and RDF (refuse derived fuels), will most likely lead to increased leaching. This will be more prominent for oxyanions than for metals. In the evaluation of the application of coal fly ash in cement production or in partial cement replacement, it is important to assess the materials behaviour in recycling stages in unbound form besides its leaching behaviour of the intact product in its service life. This aspect has not been addressed before. If a material performs poorly from an environmental point of view in its recycling stages, one should be more critical in allowing (too) high levels of co-firing or too high mixing ratios of biomass. In general, the oxyanions will be more critical than most metals. The variability in several types of biomass is rather high. This holds limitations for plant operation and availability. Premixing of biomass during size reduction leads to more consistent input and thus to more constant ash quality. Co-firing may lead to increased Cr-VI levels in the fly ash due to oxidation of Cr, which is more prominently present in flue gas upon biomass co-firing than in case of regular coal firing. Elevated Cr-VI levels are more leachable. The following recommendations have been made: measurement of leaching behaviour of coal fly ash from co-firing of different biomass streams with a special emphasis on Cr-VI leachability; measurement of flue gas quality relative to pure coal combustion during co-firing of contaminated biomass streams; verification of durability of cement-based products containing coal fly ash with ash from biomass; evaluation of the leaching behaviour of recycling products from the primary uses of biomass ash or fly ash. 35 refs.


Terug naar overzicht.